Paul Estrada discusses the benefits of integrated analog FastSPICE with Tanner EDA tool suite

YouTube Preview Image

Contact Information

Tanner EDA

825 S. Myrtle Avenue
Monrovia, CA, 91016

tele: +1.626.471.9700
toll-free: 877.325.2223
fax: +1.626.471.9800

Share and Enjoy:
  • Digg
  • Sphinn
  • Facebook
  • Mixx
  • Google
  • TwitThis

    September - 2012

    August - 2012

    July - 2012

    • KLA-Tencor 450mm-Capable Surfscan® SP3 Systems

      At Semicon West 2012 KLA-Tencor Corporation (NASDAQ: KLAC) talked with New Tech Press about new installations of the Surfscan® SP3 450, the first process control systems capable of handling and inspecting 450mm wafers. Marketing division head Amir Azordegan siad the system is a precursor for the industry wide acceptance of 450mm process development. He claimed the Surfscan SP3 450 delivers critical capability for manufacturers of 450mm process equipment, such as wet clean tools, CMP pads, slurries and polishers, film deposition tools and annealing systems. KLA-Tencor has received multiple orders for the tool and shipped six.

    • Chipmakers Adopt Cymer’s SmartPulse™

      New Tech Press sat down with Nigel Farrar, vice president of marketing and lithography Technology for Cymer, Inc.(Nasdaq: CYMI) to talk about the prospects of extreme UV process adoption, as well as new products including the SmartPulse™ data management tool, and focus drilling technology for ArF immersion light sources.

    • Chris Mack goes deep (UV)

      With all the excitement at Semicon West 2012 about the move to 450mm wafer manufacturing, New Tech Press decided to call up the Lithoguru, Chris Mack, to get a reality check on the news. As usual, Dr. Mack was more circumspect than excited. Mack was vice president of lithography technology for KLA-Tencor. before “retiring” to write, teach and consult in the field of semiconductor lithography. He has trained more than 2,000 lithographers from over 200 different companies around the world, and is an adjunct faculty member in the Electrical and Computer Engineering and Chemical Engineering Departments of the University of Texas at Austin. In January 2012 he become Editor-In-Chief of the Journal of Micro/Nanolithography, MEMS, and MOEMS (JM3).

    • Power and Reliability Sign-off

      Power and Reliability Sign-off Using RedHawk and Totem in GlobalFoundries Advanced 28nm Low Power Process

    • "New Verdi³ and the Verdi Interoperability Apps (VIA)", Mark Milligan, VP of Marketing, Springsoft

      Mark Milligan, VP of Marketing at Springsoft, speaks with Graham Bell from Real Intent about the new Verdi³ debug environment and the VIA exchange for the integration of verification tools from partners such as Real Intent. The interview took place at the Real Intent DAC 2012 booth in San Francisco in early June.

    • “What is Driving Lint Usage in Complex SOCs?”, Jim Foley, R&D Manager, Real Intent

      Jim Foley, R&D manager at Real Intent speaks with Graham Bell regarding what is driving RTL lint usage in Complex SOCs. This interview took place at the Real Intent DAC 2012 booth in San Francisco, CA in early June.

    • "Real Intent Demos, and CDC Issues", Jay Littlefield, Sr. FAE

      Jay Littlefield, Sr. FAE at Real Intent, discusses with Graham Bell the various demonstrations being shown at the Real Intent DAC 2012 booth. He goes on to mention what are some of the issue with verifying correct signal crossing between asynchronous clock domains.

    June - 2012

    April - 2012

    March - 2012